🎛️ Crypto Buy & Sell Signals

Live buy and sell signals from 26 indicators on Binance data, each with its rule and value, plus the rating's past track record. Not investment advice.

Loading Data: Binance public API and WebSocket (spot USDT)

Calculate on

–

Combined indicator signal

Summary (26 indicators)

–

Oscillators (11)

–

Moving averages (15)

–

This adds up 26 fixed indicator rules. It is not a recommendation; read it together with the track record below.

Each timeframe uses up to its latest 1,000 bars and refreshes every 60 seconds. Tap one to switch to it.

Chart

EMA20EMA50EMA200

RSI(14) · 70 / 30

MACD(12, 26, 9)Signal

● markers: closed bars where the summary rating turned 'Strong buy' (below the bar) or 'Strong sell' (above the bar), after bar 200. What followed them is in the Strong buy and Strong sell rows of the track record below.

Reading the chart now

Loading…

The current values put into words. It says nothing about where price goes next.

Oscillators (11)

Indicator	Value	Signal	Rule · now

Moving averages (15)

Indicator	Value	Signal	Rule · now

Tap a row to see what that indicator measures.

Track record: what happened after each rating

Calculating…

Summary rating (closed bar)	Bars (non-overlapping)	–	Avg change	vs all bars

Each closed bar is rated using only data available at that bar, then compared with the close a fixed number of bars later. Consecutive bars share overlapping windows, so the samples are not fully independent. The number in brackets counts samples without overlap (after using one, the next N−1 bars are skipped); rows where it is below 30 are greyed out. Fees are not included. Past rates do not guarantee future ones.

Method: how the signals are calculated

How the summary rating is set

Each of the 26 indicators returns buy (+1), neutral (0) or sell (−1). The 15 moving averages and the 11 oscillators are averaged separately, and the summary score (−1 to +1) is the average of those two. Indicators without a value (too few bars) are left out of the average.

Strong sell: score below −0.5
Sell: −0.5 up to (not including) −0.1
Neutral: −0.1 to 0.1 inclusive
Buy: above 0.1 up to 0.5
Strong buy: above 0.5 (the same boundaries as TradingView's Technical Ratings)

15 moving averages

SMA 10, 20, 30, 50, 100, 200; EMA 10, 20, 30, 50, 100, 200; VWMA 20; HMA 9: close above the line is buy, below is sell, equal is neutral. Ichimoku (9, 26, 52): price above the cloud (leading spans A and B at the current bar) with the conversion line above the base line is buy; below the cloud with the conversion line below the base line is sell; anything else is neutral.

11 oscillators

RSI(14): below 30 and higher than the previous bar → buy; above 70 and falling → sell
Stochastic %K(14, 3, 3): %K crosses above %D while below 20 → buy; crosses below while above 80 → sell
CCI(20): below −100 and rising → buy; above 100 and falling → sell
ADX(14, 14): when ADX is above 20 and rising, +DI > −DI → buy, −DI > +DI → sell
Awesome Oscillator: crosses above zero, or a saucer above zero (two bars ago > previous < now) → buy; the mirror → sell
Momentum(10): higher than the previous bar → buy; lower → sell
MACD(12, 26, 9): MACD line above the signal line → buy; below → sell
Stochastic RSI(3, 3, 14, 14): K crosses above D with both below 20 → buy; crosses below with both above 80 → sell
Williams %R(14): below −80 and rising → buy; above −20 and falling → sell
Bull Bear Power(13): EMA13 rising and bear power below 0 and rising → buy; EMA13 falling and bull power above 0 and falling → sell
Ultimate Oscillator(7, 14, 28): above 70 → buy; below 30 → sell

Differences small enough to be rounding error (one ten-billionth of the price for price-scale values, or 0.000000001 for oscillator values such as RSI and CCI) count as equal.

What calculating on the forming bar means

With "Live bar", the last bar that has not closed yet is included at its current price. The page recalculates whenever the WebSocket delivers a price (at most once a second), so the signal can change several times before the bar closes. "Closed bars" uses only bars that have finished, so it changes only when a bar closes. The track record and the chart markers always use closed bars.

How the track record is measured

For every loaded closed bar (up to 1,000), the summary rating is computed from the data up to that bar, and the page counts whether the close N bars later was higher. N is 16 bars on 15m (4 hours), 24 on 1H (1 day), 30 on 4H (5 days), 20 on 1D and 8 on 1W. Counting starts at bar 200, the first bar where the 200-bar moving averages exist. Consecutive bars share overlapping windows, so the page also counts samples without overlap (k); when the gap from the all-bars rate is smaller than roughly 100/√k points, it says a gap that size often arises by chance.

Numbers in the chart reading

EMA 20, 50 and 200; RSI(14); MACD(12, 26, 9); where the Bollinger Band (20, 2) width sits among the last 120 bars; ATR(14); the last closed bar's volume divided by the average of the 20 bars before it; classic pivots from the previous UTC day (P = (high + low + close) / 3, R1 = 2P − low, S1 = 2P − high); swing highs and lows (bars higher or lower than the 5 bars on each side).

Data

Up to the latest 1,000 bars come from Binance's public spot API, and a Binance WebSocket stream keeps the last bar live. If the connection drops it reconnects with growing delays; after three failures it switches to the backup address (data-stream.binance.vision), and if that fails too it polls every 15 seconds. If no data arrives the values stay empty and an error is shown. KRW prices multiply by Bithumb's USDT/KRW rate and are a reference only. Everything is calculated in your browser.

Where it may differ from TradingView

The framework (15 moving averages plus 11 oscillators) and the label boundaries match TradingView's Technical Ratings, but several rules differ from the ones in TradingView's help page.

Ichimoku: here it combines cloud position with the conversion and base lines
Stochastic: here only a bar where %K crosses %D counts, and %D's level is not checked (TradingView uses the state %K and %D both below 20 with %K > %D)
ADX: here a sell also requires ADX to be rising (TradingView's sell uses a falling ADX)
Stochastic RSI: no trend condition is applied
Awesome Oscillator saucer: all three bars must be above (or below) zero
Bull Bear Power: the trend is judged by the EMA13 slope

So the rating can differ on the same bar. Smoothed indicators such as EMA also start from the first loaded bar, so the last digits can differ slightly, and HMA rounds its half length down (9 → 4).

For information only, not investment advice. Data comes from exchanges' public APIs and may be delayed or interrupted. Charts: TradingView Lightweight Charts™

What this tool does

This tool runs 26 technical indicators (15 moving averages and 11 oscillators) through fixed, published rules so each one returns a buy, neutral or sell signal, and adds them up into a combined indicator signal. It calculates from real Binance spot bars and a live WebSocket feed, and every signal is shown next to the rule that produced it and the current value. The same page shows the track record: how price actually moved after the same rating on this coin and timeframe.

How it is calculated

Each indicator scores buy +1, neutral 0 or sell −1. The moving averages (SMA and EMA 10, 20, 30, 50, 100, 200, VWMA 20, HMA 9) are buy when the close is above the line and sell when it is below. Ichimoku (9, 26, 52) is buy only when price is above the cloud and the conversion line is above the base line, and sell only in the mirror case. The oscillators are RSI(14), Stochastic (14, 3, 3), CCI(20), ADX(14, 14), Awesome Oscillator, Momentum(10), MACD(12, 26, 9), Stochastic RSI (3, 3, 14, 14), Williams %R(14), Bull Bear Power(13) and Ultimate Oscillator (7, 14, 28). Of these, RSI, Stochastic, CCI, Stochastic RSI and Williams %R signal only when they turn inside an overbought or oversold zone, ADX, Awesome Oscillator, Bull Bear Power and Ultimate Oscillator only when their conditions are met, and MACD and Momentum almost always point to buy or sell. The two groups are averaged separately and then together into a summary score from −1 to +1: below −0.5 is Strong sell, from −0.5 up to but not including −0.1 is Sell, −0.1 to 0.1 inclusive is Neutral, above 0.1 up to 0.5 is Buy, and above 0.5 is Strong buy (the same boundaries as TradingView's Technical Ratings). "Live bar" includes the unfinished bar at its current price and recalculates at most once a second, so it can change before the bar closes; "Closed bars" uses finished bars only.

Pick a coin and a timeframe (15m, 1H, 4H, 1D, 1W). Sharing the address bar link opens the same coin, timeframe and calculation basis.

Choose the calculation basis: "Live bar" for values that move with the price, "Closed bars" for values that change only when a bar closes.

Read the three gauges for the summary, oscillator and moving average scores and their buy, neutral and sell counts, then compare other timeframes in the row below.

Check the rule and current value behind each signal in the indicator tables. Tap a row to see what that indicator measures.

In the track record table, compare how often the close was higher N bars after the current rating with the rate for all bars.

Things to know

The 15 moving averages move together, so they lean to one side for as long as a trend lasts. Apart from MACD and Momentum, the oscillators only signal when they turn at an extreme or a set condition is met, so they are usually neutral. The two gauges disagreeing is common.

If a rating's rate in the track record is within a few points of the all-bars rate, bars with that rating were followed by moves not much different from any other bar on this coin and timeframe. Consecutive bars share overlapping windows, so the number of samples counted without overlap is shown in brackets, and rows where it is below 30 are greyed out.

A rating calculated on the live bar can change when the bar closes. The track record and the ▲▼ chart markers always use closed bars.

The chart reading turns the current numbers into sentences: position against EMA 20, 50 and 200, RSI and MACD, Bollinger Band width, ATR, the volume ratio, the previous day's pivots and swing highs and lows. It says nothing about where price goes next.

KRW prices multiply the USDT price by Bithumb's USDT/KRW rate. They are a reference only and can differ from Korean exchange prices, which include the kimchi premium.

Frequently asked questions

Does a buy signal mean I should buy?

No. Buy, neutral and sell on this page are the output of fixed rules, not anyone's opinion or recommendation. That is why the page also shows what happened after the same rating in the past. Those rates vary by coin, timeframe and period, and they are sometimes lower than the rate for all bars.

Is this the same as TradingView's Technical Ratings?

The framework of 15 moving averages plus 11 oscillators and the label boundaries (±0.1, ±0.5) are the same, but several rules differ from those in TradingView's help page: Ichimoku (here cloud position is combined with the conversion and base lines), Stochastic (here only a bar where %K crosses %D counts, and %D's level is not checked), ADX (here a sell also requires ADX to be rising), Stochastic RSI (no trend condition), the Awesome Oscillator saucer (all three bars above zero) and the trend test in Bull Bear Power (the EMA13 slope). So the rating can differ on the same bar. Smoothed indicators such as EMA also start from the first loaded bar, and HMA 9 rounds its half length down to 4, so the last digits can differ slightly.

What is the difference between "Live bar" and "Closed bars"?

"Live bar" includes the last, unfinished bar at its current price. The page recalculates whenever the WebSocket delivers a price (at most once a second), so the rating can change several times before the bar closes. "Closed bars" uses only bars that have finished, so it changes only when a bar closes. If the WebSocket drops, the page reconnects, and if that keeps failing it switches to polling every 15 seconds.

How is the track record calculated?

Starting at bar 200 of the loaded bars (up to the latest 1,000), every closed bar is rated using only the data available at that bar. For each rating the page then counts how often the close N bars later was higher, and the average change. N is 16 bars on 15m (4 hours), 24 on 1H (1 day), 30 on 4H (5 days), 20 on 1D and 8 on 1W. Consecutive bars share overlapping windows, so they are not independent samples; the page also counts samples without overlap (after using one, the next N−1 bars are skipped). When the gap from the all-bars rate is smaller than what that count could produce by chance (roughly 100/√count points), it says so. Fees are not included.

For information only, not investment advice. Data comes from exchanges' public APIs and may be delayed or interrupted.